Avenue Shifters · Journal · Gearing
Low Gear to Get Rolling: Why Starting Gears Matter More Than Top Speed
Ask riders what gearing they want and most reach first for the top end — how fast the bicycle can go. Ask them where a ride actually gets hard, and the answer is somewhere else: the first ten feet. A stop sign on a slight rise, a driveway with a load in the basket, a light that turns green while you are still finding the pedals. That is why this plain-English guide to bicycle gear ratios explained for real starts begins at the bottom of the range, not the top. The lowest gear you have decides whether starting feels calm and seated or like a standing, wobbling shove. Top speed is the last number that matters.
What a gear ratio actually means, in plain terms
A gear ratio is simply a comparison: how many times the rear wheel turns for one full turn of the pedals. In a low gear, the wheel turns fewer times per pedal turn, so each stroke asks for less force and the bicycle moves a shorter distance per stroke. In a high gear, the wheel turns more times per pedal turn, so each stroke asks for more force and covers more ground — useful once you are already moving, punishing when you are not. Think of it the way you think of carrying something heavy: short, easy steps get you moving; long strides only work once you have momentum. A clearly generic example makes the idea concrete, and it is not a specification for any particular bicycle: if a low combination turns the wheel once for each pedal turn and a high combination turns it three times, the high combination is not three times better. It is three times more demanding per stroke, which is exactly what you do not want from a standstill.
That trade — force for distance, stroke by stroke — is the whole story of gearing. Low gears trade distance for ease. High gears trade ease for distance. A well-chosen range gives a rider both ends of that trade and a sensible path between them, so no single moment of the ride, least of all the start, demands a force the rider should not have to produce.
The first ten feet decide how a ride feels
Starting is the hardest work on any ride because nothing is helping you yet. There is no momentum, balance is least settled at walking pace and below, and the rider is often watching traffic, a curb, or a companion rather than thinking about gears. In too high a gear, a start becomes a hard push through the first strokes: knees and hips take the strain, the bicycle weaves while the rider stands or strains to get it moving, and the whole maneuver feels exposed exactly where a rider wants to feel composed. In a properly low gear, the same start is almost unremarkable — a seated push, pedals turning at a comfortable pace, the bicycle gathering speed in a straight line while the rider looks up and around, where their attention belongs.
This is why experienced riders shift down as they approach a stop, arriving already in a starting gear. It is good practice, and it is also a habit that has to survive tiredness, distraction, hills, and loads. A system that manages gear selection for the rider removes that mental errand entirely: the bicycle is in a gear chosen for starting because starting is what happens next. Avenue Shifters is built around that idea — holding the rider in a comfort cadence band of 55–85 rpm and managing the gear selection, so the start after every stop begins the way a start should.
Cadence and load: why the same gear feels different every day
Cadence is how fast the pedals turn, measured in revolutions per minute. Load is everything working against that turn: a rise in the road, a headwind, cargo, a passenger's worth of groceries, or simply a heavier day in the rider's own legs. The same gear can feel easy on a flat, empty morning and unreasonable on the way home with shopping into the wind — not because the bicycle changed, but because the load did. That is why judging gearing by a single test ride on a flat street misleads. The honest test includes a start on a gentle rise and a start carrying what you normally carry.
When cadence falls too low under load, every stroke becomes a push rather than a turn, and riders feel it in their knees before they name it. When a rider can keep pedaling at a steady, comfortable cadence, the work spreads evenly across the stroke and across the ride. We believe holding that cadence band will improve charge range on electric bicycles by 10–15% — but this has yet to be tested, and we publish range only as a target, never as a settled figure, until dated tests say otherwise. The starting point does not need a range claim to be true: a low enough gear, reached without thinking about it, makes the first ten feet easier today, on any bicycle.
Why top speed is the last number to chase
Top gear earns its keep in a narrow slice of riding: already moving, road open, conditions kind. Most real rides — errands, neighborhood trips, shared paths, stops and starts through town — spend very little time there. A rider who trades away a genuinely low starting gear to gain a slightly higher top gear has improved the rarest moment of the ride by worsening the most common one. Judge a range from the bottom up instead. First, is the lowest gear low enough for your hardest honest start: the rise near home, loaded, on a tired day? Second, are the steps between gears small enough that you can always find one that lets you pedal comfortably, rather than choosing between a strain and a spin? Only third, once those two are satisfied, does the top end deserve a look — and for most riders, it will already be enough.
Where it stands
Avenue Shifters launches on Kickstarter on November 12, 2026, with a funding goal of $200,000 and a stretch target of $1,360,000. Follow the campaign there to be notified at launch, and read the rest of the Avenue Journal for how automatic shifting works, what cadence is, and how we label range targets until the dated tests are run.
Avenue Cruisers Co. LLC · Des Moines, Iowa