Servo-ER Reverse (Royal Blue) overview · Avenue Cruisers Avenue Shifters is live on Kickstarter through December 27

AVENUE CRUISERS CO.

Servo-ER Reverse (Royal Blue)

The complete e-recumbent with powered reverse

Servo-ER Reverse (Royal Blue) product rendering
These are product renderings. Actual product may vary slightly.
Servo-ER Reverse (Royal Blue) product rendering — side view
These are product renderings. Actual product may vary slightly.
Servo-ER Reverse (Royal Blue) The Servo-ER Reverse (Royal Blue) film is being rebuilt — it returns here once the new cut is approved.
Your pledge today$1,801
Total purchase price$3,799.95
Planned store price$4,795

Your pledge today: $1,801. Total purchase price: $3,799.95. The balance of $1,998.95 is due before your bike ships. Freight is not included in either number — US freight is a flat $185. About half now, the rest before delivery — no interest, no credit check.

Plus sales tax where it applies — calculated at checkout.

Or finance the total from $633/mo for 6 months at 0% interest with Affirm — Pay in 4 also available; your options are shown at checkout.

or from $123/mo over 36 months at 10% APR for well-qualified buyers — Affirm sets your actual rate (10–36%) at checkout.

Drive: pedal + electric assist, plus powered reverse. You pedal; the motor helps — and the direct-drive hub backs you up at walking pace.

Reverse
Powered, hold-to-reverse at walking pace
≈1,120 Wh
Single 56V battery
Oct 2027
Estimated delivery — after Kickstarter fulfillment

Specifications are confirmed before the first bikes ship; backers see the final tables before balances are due.

Ships after Kickstarter backer fulfillment (estimated October 2027)

5-year frame warranty · 7-year battery warranty · 2-year module & components warranty

Live on Kickstarter through December 27

The Servo-ER, finished in Royal Blue and built around a direct-drive front hub — because a geared hub's one-way clutch can't run backwards. Hold the reverse control and the trike backs you out of a parking spot, a garage, or a tight trailhead at walking pace, no pushing with your legs. Everything else is the Servo-ER: a single 56V battery (about 1,120Wh), heavier-duty components sized for motor torque, long cable runs built into the recumbent frame, and automatic shifting before you stop, never while stationary. UL 2849 certification not yet obtained — evaluation not yet started. Technology efficiency is anticipated to improve charge range by 10–15%, but has yet to be tested. Every Avenue bike includes a color display (speed, gear, battery), a headlight, and a horn.

Colors

Royal Blue — this edition's color. It is not offered on the standard Servo-ER.

A safety note for the electric trikes

Built low and wide to stay planted. On the electric trikes, anti-tip technology is built into the firmware — the controller watches how hard you're turning. If you carry too much speed into a tightening turn, it eases the motor's help back and warns you on the display — the bike stops pushing you deeper into the turn. It never brakes, never steers, and never touches the shifting. It just stops helping you go faster into a turn that's tightening up.

Folds for the real world

The trikes fold for transport. A frame hinge and a folding stem bring the front of the trike back alongside the rear wheel, so it fits a trunk, an RV bay, or the garage corner. The battery lifts out first, and the rear half — differential, rack, and basket — stays planted on its wheels while the light front folds. The latch is a palm-sized over-center lever with a self-engaging lock and a green locked indicator, designed for hands that don't pinch and grip like they used to. On the electric trikes, the display checks the frame lock at power-on before the motor will help. The folding frame is part of the production design and passes the same first-article validation as the rest of the machine before the first trike ships. The basket behind the seat comes with a removable waterproof canvas tote that fits it — included in the price, because everybody wants a tote. Its top is a single flap on two zippers that run down the sides, so rain sheds off instead of soaking in, with tabs big enough for stiff fingers and big enough to slip a lock through, and the top rolls up and fastens back by the seat when you want it open.

Comfort is standard, too

The trikes ride on a suspension fork and a suspension seat post under the contoured seat, so rough pavement stops at the machine instead of traveling up your back. Part of the production design, validated at first article like the rest of the trike.

Seen, and able to signal

Turn signals front and rear, a pair of mirrors, and a brake light that brightens when you brake are standard on every Avenue, along with the headlight and horn. Safety equipment isn't an option package here. Every frame also carries its serial number engraved by the frame maker — no stickers — recorded to its owner at build.

Build-on-demand

The Servo-ER Reverse joins the build-on-demand program when its production costing is final. Until then it is a Kickstarter tier only — no batch counter is published for it, because we don't publish numbers we can't stand behind.

How Avenue works — the step-by-step process behind every vehicle we sell

We are a selling organization, so here is exactly what you are buying into. Avenue builds on demand: we stock no inventory, and every vehicle — one bike for one rider, or a fleet order of a hundred — goes through the same published process, run as a quality system. This is the whole of it, step by step. No fine print.

STEP 1

Pick yours, join the batch

Choose your model and options. Your order joins that model's production batch — and you can watch the batch fill on the model's live public counter before you commit another dollar.

STEP 2

The batch fills to its number

Every model has a set batch number, published on its page. When the batch reaches its number, it locks. Kickstarter pledges count into these same batches — one program, every door in.

STEP 3

Lock — the build money

At lock we collect the build money: 75% on most models (People Porter: 25% down, 75% in hand by build start). Until your batch locks, every dollar is refundable in full. Your lock money buys your parts — that is the design, so a funded batch builds on its own money, never on borrowed money in the middle.

STEP 4

We build the run — under PDCA

One production run, built and checked as one PDCA quality cycle (below). Every unit is inspected against our published standard — at most one identified issue per 25 units, and that one is caught and fixed before the unit leaves. The first unit of every model passes a first-article inspection and becomes the golden reference; no second unit is built until it passes.

STEP 5

Balance before delivery

The remaining balance is due before delivery — the full price was published on the page before you ordered, so there is nothing new to learn at this step.

STEP 6

Delivery & aftercare

At handover your serial number is confirmed with you off the physical vehicle, and the owner's manual opens on your own device before you sign. We check in at day 7 and again at day 30. The warranty is in writing: frame 5 years; battery 7 years; module and all other components 2 years.

The quality cycle every run runs on — PDCA

PDCA — Plan, Do, Check, Act — is the Deming cycle, the quality discipline Toyota built its production system on. Our build-on-demand runs are that cycle by construction:

PLAN

Each run is planned as a batch first: parts, sequence, and the quality standard are set before the first unit starts.

→

DO

The run is built in one controlled burst at its set level — not a continuous line drifting day to day.

→

CHECK

Every unit is evaluated against the standard. An issue is logged, and a defect closes only when it is fixed and re-verified.

→

ACT

What the run taught us is standardized into the next run before it locks — so every run starts better than the last.

We claim the cycle and the standard, and we publish both. What we will not do is claim results we have not run yet — as runs complete, their evaluations become part of this story, in the open.

No inventoryNo fine printPrices published in fullLive batch countersRefundable in full until lockSame process for 1 or 100

Specifications

FrameCommissioned delta trike frameset - as Servo-R.
ForkSuspension fork, e-bike and front-hub-motor rated (Suntour Mobie class direction), 2.0-2.4 in travel; must clear the fold path at first article.
Wheels and tires26 x 2.2 front, 24 x 2.4 rear
MotorDirect-drive front hub motor (this edition only — the direct-drive hub is what makes powered reverse possible; the standard Servo-ER's geared hub cannot reverse). Watts: Confirmed before shipment. Torque: Confirmed before shipment.
Battery56 V, about 1,120 Wh, about 20 Ah - single 56 V pack (the Servo-ER XL's pack, carried singly) - preliminary, RFQ unanswered. Removable: yes.
Charge timeConfirmed before shipment
Rear derailleur7-speed rear derailleur. Long-cable routing kit.
Cassette7-speed
ChainConfirmed before shipment
Shifting systemAvenue servo system. No throttle/motor-signal integration is claimed.
BrakesHydraulic disc, MT200 class direction; exact trike spec: Confirmed before shipment. Lockable parking brake.
DisplayColor MIP module - as Servo. Panel size: Confirmed before shipment.
HeadlightBusch and Muller IQ-X E class - as Servo.
HornBusch and Muller Signal Horn 660 class - as Servo.
SecurityKeyed battery lock; lockable parking brake plus hardened anchor; IMU alarm plus transport mode; app can disable assist.
GeometryDelta trike: track 27.1 in, overall width 30.0 in, wheelbase about 44.5 in, seat height 20.1 in
WeightConfirmed before shipment
Weight limitConfirmed before shipment
RangeConfirmed before shipment
DeliveryOctober 2027 (recumbents). Estimates assume UL 2849 certification is obtained on the planned timeline; if that timeline moves, backers are told the same week.
CertificationUL 2849 certification not yet obtained — evaluation not yet started.
ReversePowered reverse: hold-to-reverse control, walking pace (about 3 mph), audible beeper while reversing, interlocked with the display's frame-lock check.
ColorRoyal Blue — this edition only.

Shared system specs

ActuatorRotary servo rotating a slotted disc directly on the servo output spline; the cable anchors at disc hole 7 for about 0.67 in of travel across the gears. No wrap drum, no intermediate gearbox.
Production servo (direction)Hitec DB950SW class: brushless, steel gears, aluminium heat-sink case, 40 x 20 x 1.52 in, 68 g, 4.0-8.4 V, stall torque 34.7 in-lb at 6.0 V, 0.17 s/60 degrees at 6.0 V, 1M-cycle potentiometer rating, 25T spline.
Servo placementLow on the chainstay at the rear derailleur, on a bracket, protected position; cable run supported along the chainstay. Production direction: servo may be encased; sensors and wiring protected.
Slotted disc / cable anchorShift cable anchors at disc hole 7.
Cable travelAbout 0.67 in across gears 1-7 (reference platform).
Gear map (reference)Servo degrees per gear 1: 60, 2: 105, 3: 110, 4: 125, 5: 138, 6: 155, 7: 175; every command clamped in firmware to 5-175 degrees. Map is a measured table per derailleur, not a formula.
Hold / releaseAfter a move the servo stays attached and holds the gear against the derailleur spring indefinitely (650 ms bounds the movement phase only). Releases only on low-rail cutoff (default 4.6 V) or power removal. Never shifts while stationary.
Brain box (controller)Reference build: Adafruit Feather nRF52840 Express controller in the brain box, mounted mid-bike by the seat post. Production controller change only by controlled revision. Firmware core v5.30 (builds 1049 / 1050).
Servo power railSeparate 5 V rail; healthy band with servo connected 4.75-5.25 V.
Sensors - production directionLittelfuse 55100 housed Hall sensor, IP67, -40/+100 C - same part for wheel and cadence (reed switches rejected for production). Magnets N42SH, encapsulated/overmoulded. IMU direction: ST ISM330DHCX. Protected, replaceable sensor modules.
Cadence bandRider preferred cadence stored as a band (app sets target plus/minus 10 rpm); compiled stock band 55-85 rpm (center 70). Consumed by shift logic in firmware build 1050.
Shift decision inputsCadence plus wheel speed plus grade (IMU) on board, with no phone required. Phone app additionally feeds GPS speed and live wind speed; the bike computes headwind from the two. GPS grade look-ahead and wind/load terms are shift-decision inputs — hill anticipation and headwind response are features of the system.
Phone appAvenue Shifters app, Bluetooth (BLE Data Link service, 18 characteristics, encrypted/bonded). Remembers the bike and reconnects on its own. No accounts, no analytics; location used only to feed the rider own bike. In-app software updates; the app refuses to start an update while the wheels are turning. Bluetooth name is provisioned per unit (default Avenue Shifters).
What is in the box (all models)The complete bicycle, with the Avenue Shifters system fitted: Servo shift module (servo plus controller), speed and cadence sensors, wiring harness, shift wire, mounting hardware, color display, headlight, horn. Recumbent family adds the long-cable routing kit.
CertificationUL 2849 certification not yet obtained — evaluation not yet started.

Manufacturers: license the Avenue Shifters shifting firmware for your own builds — OEM Software License, $35 per bike: bill@aitoolsfortoday.com

Questions, answered plainly

Is this a kit I fit to my bike?

No — every Avenue model is a complete bicycle with Avenue Shifters built in, not a kit and nothing to fit to a bike you own.

How does build-on-demand work?

We don't stock bikes. Every order — here or on Kickstarter — joins the model's production batch, and the batch counter on this page shows exactly where it stands: how many bikes are in, and how many more start the build. When the batch reaches its number it locks, we collect the 75% lock payment, and we build the batch — then the balance is due before your bike ships. Your money is refundable in full until your batch locks. When a batch locks, the next one opens on the same page.

How does payment work?

Your pledge today is about half the total purchase price; the balance is due before your bike ships — no interest, no credit check. US freight is a flat $185, not included in either number.

Where do your range, charge-time, and battery numbers come from?

From the battery manufacturer, in writing. We buy batteries that are already UL rated, with performance ratings stated by their maker — range and charge times are published as the maker's stated figures, labeled as such, and our own test results are added as we get them. UL 2849 certification is not yet obtained — evaluation not yet started.

What warranty do I get?

A 5-year frame warranty and a 2-year warranty on the Avenue Shifters module and all other components; electric models also carry a 7-year battery warranty. Claims start with an email to bill@aitoolsfortoday.com — the shifting module is handled by swap-by-mail. The full terms are on the Warranty page.

What if my bike or trike arrives damaged?

Tell us right away and send photos. We never take a whole bike back — we ship you the replacement component for whatever was damaged, you swap it in, and we file the carrier claim for the parts ourselves.

What will replacement parts cost?

Our cost, plus shipping, plus 15% to cover handling — including replacement battery packs, priced the same way.

Rider feedback

Help us improve automatic shifting. Tell us how you ride and what frustrates you about shifting.

Servo-ER Reverse (Royal Blue)$3,799.95 totalBack it on Kickstarter